Available in caAvailable in us
Conquest Spreader
Options
- Stainless Steel Construction for long term corrosion resistance
- 3 Lane Stainless Steel Symmetry Spinner capable of centerline or 1‐3 lane casting spread patterns
- Single Lane or 3 Lane Liquid Anti‐Icing with built‐in pre‐wet capability using the same pump
- Side Rolling Waterproof Tarp with rear access manual crank
| Model | Outside Length |
Liquid Capacity |
Granular Capacity |
Approx . Weight |
|---|---|---|---|---|
| Conquest 13’ |
13’ | 800 US Gal | 10.3 yd3 | 6500 lb |
| Conquest 14’ |
14’ | 800 US Gal | 11.1 yd3 | 6850 lb |
| Conquest 15’ |
15’ | 800 US Gal | 11.9 yd3 | 7200 lb |
Other Information
Truck Requirements
Electrical:
- 16‐pin Deutsch Connection at rear of chassis (supplied with hopper)
- 12V ignition power (30A)
- Battery or chassis ground
- 12V power from marker/tail circuit on chassis
- Ground speed signal from chassis module
- Left, center, and right DLA spray boom switch 12V signals (if hopper is equipped with 3‐lane DLA)
Hydraulic:
Open Center Hydraulic System (gear pump or fixed displacement piston pump)- Hydraulic Pressure (30 GPM, 2600 psi, 10 micron pressure filter)
- Hydraulic Return (25 micron return filter)
- Valve Bleed (unrestricted to top of tank)
- Hydraulic Return (25 micron return filter)
- Load Sense
- Valve Bleed (unrestricted to top of tank)